LED Lamp 24W/48W ECO
DELIVERY 72H 7 days to return Delivery from €4 SHARE ON FB
Professional ECO lamp for UV Gel polish manicure. Equipped with high quality 21 LEDs, which translates into 48W effective power, and a 24W real power.
The cure time is the same as for 48W lamps but with less energy consumption.
This lamp can be used for both UV gel polish and gels.
- aesthetic appearance makes it suitable both for home use and professional salon,
- Built-in motion sensor,
- curing time-saving function,
- Low Heat Mode - gradual warm up of the lamp,
- energy-saving LEDs,
- LED bulbs ensure the safety of the lamp and protect it from excessive temperature rise, and their even distribution guarantees perfect cure,
- simple, intuitive operation,
- Up to 3 operating times: 30, 60, 99 seconds,
- The lamp is equipped with a motion sensor, which activates the lamp after inserting the hand,
- The lamp is maintenance-free, because it does not need to replace fluorescent lamps, thanks to LED technology,
- The bottom part is on the magnet.
- Connect the power supply to the lamp.
- When the device is turned on, select the curing time using Timer 30s / 60s / 99s.
- Pressing the Low Heat Mode button will cause the unit to heat up slowly. The power of the device doubles after 30 and 50 seconds. This mode is particularly helpful in case of problems with hardening of the gel polish.
- The 30s / 60s / 99s buttons additionally support the preset function. Hold down the button for 2 seconds to memorize the setting. Restoring the default settings will be done by pressing 30s / 60s / 99s again.
- The 99s key has additional functions. When you start the lamp with the 30s / 60s button, hold down the 99s key for 2 seconds to double its power. Holding down the 99s button for 2 seconds restores the standard power. To stop the function, press any button.
- If you do not use the Timer buttons, the infrared sensor will start working when you insert your hand into the lamp. The maximum operating time of the lamp without triggering Timer is 99 seconds.
- When the Timer mode is selected, the remaining exposure time will be displayed. When the lamp is activated with the motion sensor or the 99s button, the active time counter will be displayed.
- Max Power: 24W / 48W.(EU plug)
- Wavelength: 365 + 405 nm.
- Number of Diodes: 21 pcs.
- Weight: 395 g.
- DC 24V 1.5 A.
DIMENSIONS OF THE LAMP:
- width: 21.5 cm,
- depth: 16.8 cm,
- height: 9 cm,
THE PACKAGE CONTAINS:
- LED lamp 24/48 W,
- AC adapter,
- warranty card.
- Read the manual before using the lamp.
- Use the lamp according to its intended use.
- Avoid contact with liquids, otherwise the appliance may be damaged.
- Please do not use the lamp when the countdown timer is off. Disconnect the plug from the power supply after work.
- In the event of a power failure, disconnect the power supply.
- Do not use the unit continuously for more than 600 minutes. Exceeding this time may damage the unit.
- To protect your eyes, use safety goggles.
- This equipment may be used by children aged 8 years and by persons with reduced physical and mental abilities, and persons with inexperienced and knowledgeable equipment if supervision or instruction is provided regarding the safe use of the equipment, Threats were understandable. Children should not play with equipment. Unattended children should not perform cleaning and maintenance of equipment.
Add your comment:
Comments Add your comment